بيان صحفي تجاري
Thermal separation technology allows for savings in steam consumption of up to 10 percent
18 Nov 2021
GEA is supplying Olin, a North American manufacturer of chlorine chemicals headquartered in Clayton near Saint Louis, with a thermal vapor recompressor for a distillation plant at its Stade site.
Variable – Flow Ejectors are based on proven GEA jet pump technology and often used for heat recovery. (Photo: GEA)
GEA's nozzle needle-controlled vapor jet compressor enables the specific steam consumption for the thermal separation technology to be reduced by up to ten percent. For Olin, the reduction in specific steam consumption as well as the entire, overall system for thermal separation technology has a positive effect on operating costs.
Size of jet pump and large control range had to be taken into account in project planning
The overall system was developed by GEA in close coordination with Olin and all the requirements defined in advance by the customer. In addition to the size of the jet pump (DN 800), the large control range was a challenge in planning the project. The choice fell on a system with a nozzle needle-controlled steam jet compressor. These are used for tasks that require a wide load range. Their advantage over control by a throttle valve is the constant high motive steam pressure. In this case, the adjustment to the required energy takes place exclusively via the control of the motive steam quantity. The loss of power that occurs with throttling is eliminated. This enables savings of up to ten percent in steam consumption.
Wide range of applications for nozzle needle-controlled steam jet compressors from GEA
In principle, nozzle needle-controlled steam jet compressors from GEA can be used wherever excess waste heat can be compressed to a higher pressure level for further use as process energy.
Contact
Dr. Michael Golek
Media Relations
GEA Group Aktiengesellschaft
Peter-Müller-Str. 12
40468
Düsseldorf
Germany
+49 211 9136-0
About GEA
نبذة عن GEA تعتبر GEA واحدة من أكبر الموردين لصناعة معالجة الأغذية ومجموعة واسعة من الصناعات الأخرى والتي حققت إيرادات موحدة بلغت قُرابة 4.9 مليار يورو في عام 2019. تتخصص المجموعة الدولية للتكنولوجيا في الآلات والمصانع، وكذلك تكنولوجيا
