The ECM Concept: Exchangeable Compression Module
The Exchangeable Compression Module (ECM) is the unique, distinctive feature that sets the MODUL tablet press apart.
The Exchangeable Compression Module (ECM) is the unique, distinctive feature that sets the MODUL tablet press apart. The patented ECM is a tremendous improvement on the exchangeable turret concept and offers very high containment with incomparable productivity and flexibility for tablet compression. Much more than a conventional exchangeable die table, the ECM is a sealed unit that’s isolated from the remainder of the tablet press and not only contains the turret and compression tooling, but all the press’s product-contact parts as well.
At the end of a production run, the ECM can be removed from the machine in just 15 minutes. No machine cleaning is required, as all product contact parts and powder residues are encapsulated in and removed with the ECM; the inside and outside of the press are left perfectly clean. A duplicate, clean ECM can then installed in the machine in another 15 minutes.
Providing both operator and product safety, the ECM can be easily removed and exchanged with a replacement unit in just 30 minutes for fast product changeover and the complete line can be back in full production in less than one hour. Offering easy cleaning, high productivity and removing any risk of cross-contamination, this extremely short changeover time results in unmatched productivity and flexibility for tablet production.
The standard ECM provides a closed environment that ensures contamination levels outside the machine remain below 10 μg/m3. This is ideally suited for non-potent pharmaceutical applications in which a dust-tight seal provides adequate protection when the doors of the press are opened. The ECM can then be safely removed for cleaning in a designated area, usually with a simple air hose. There is no further need to clean the inside of the press or the room in which it operates.
The WOL ECM has been specifically designed for tableting operations using highly potent APIs to keep operators safe from harmful compounds, without the use of cumbersome air suits, and to prevent cross-contamination. The WOL ECM maintains the concentration of harmful APIs in the environment around the tablet press below 1μg/m3.
The table below shows which ECM types are available for each model (MODUL P, MODUL S).
MODUL P | MODUL S | |
C-ECM | x | x |
HC-ECM | x | x |
WOL-ECM | x | x |
BL-ECM | x |
The WOL ECM has been specifically designed for tableting operations using highly potent APIs to keep operators safe from harmful compounds, without the use of cumbersome air suits, and to prevent cross-contamination. The WOL ECM maintains the concentration of harmful APIs in the environment around the tablet press below 1μg/m3.
Made from corrosion-resistant materials, the WOL ECM can be removed from the press and washed separately, using strong detergents, without any risk of damage. Washing takes place in a sealed environment using a special wash skid that avoids the need to open the ECM or remove any components (such as punches) and uses the minimum amount of water and detergent. The WOL ECM can be opened for final manual rinsing and drying without any risk of toxic material becoming airborne. All electrical components, or components that cannot be constructed from suitably corrosion resistant materials, such as cams and bearings, are kept outside the confines of the ECM so do not require cleaning.
The fast product changeover time of just 30 minutes is particularly significant for high containment operations as the same operation on a standard isolator-based system can take up to 16 hours.
MODUL P 'ECM' technology with advanced dual control for R&D and small to medium production for single & bi-layer tableting, ideally suited for formulation development, clinical trial production and small-batch / multi-product production.
Thanks to the ECM (Exchangeable Compression Module), the MODUL S for medium-volume tablet production enables extremely fast change-over and offers unparalleled operator protection. All product contact parts are contained in an ISOLATED DUST-TIGHT module, which can be disconnected and removed from the machine in a contained manner, leaving the tab...
Featuring an innovative design that promotes operator (and environmental) safety and ease of use, the NexGen Press® range is modular, intuitive and cost-effective to run, combining unrivaled containment with fast product changeovers and the best price-performance tableting system..
健康で幸せな乳牛は、持続可能な生乳生産を成功させる鍵です。したがって、乳牛を健康に保つことは、すべての酪農家の取り組みの中心にあります。個々の乳牛のニーズに合わせた適切な給餌、良好な飼育環境、新鮮な空気、水、光など、多くの要因が乳牛の健康に影響を与えます。しかし同時に、搾乳方法は乳牛の健康状態に大きな影響を与えます。GEAは「Good Cow Milking」の理念でよく知られており、家畜の健康と乳質においてより良い結果を出すために、常にさら...
どの業界も、厳しい脱炭素規制や法規制を乗り越えながら、ネットゼロの目標達成に向けて懸命に取り組んでいます。同時に、企業は、品質、製品開発、プロセスの最適化に対する高まる要求のバランスを取りながら、収益性の向上に努めなければなりません。この課題には、GEAが提供するような協調的かつ包括的なアプローチが必要です。
コーヒー、カカオ、牛乳、肉、魚、卵。こういった毎日の定番ともいえる食材は、集約農業に大きく依存しています。ニューフード技術の台頭に伴い、これまで以上に持続可能な代替食品を使用できるようになりました。そこで今回は、GEA で液体・発酵・充填担当上級副社長を務めるライマー・グッテ博士と対談し、その可能性と政策について探ってみました。