Palletizers & Depalletizers
The layer preparation system Polaris EVO is equipped with pack gripping heads that move and/or rotate packs to their required position, in order to prepare a whole layer of products according to a pre-defined pattern.
Polaris EVO is a modular system that can be installed as a single unit (for medium-speed lines) or in series (for high-speed lines and/or complex palletizing patterns).
The new handling robot operates in a SCARA-based configuration (Selective Compliance Assembly Robot Arm). This allows the handling grip to move along a horizontal axis (x-y) only thereby excluding gravity and reducing inertia. A third vertical axis can be used to adjust the grip height (format changeover). To reduce the load on the arm the main motors and are located in the fixed part of the robot and are assembled opposite each other on the same axis.
SCARA configuration guarantees the following advantages compared with traditional Cartesian systems: the footprint is more compact; there is better visibility and easier access for the operator as there are no obstructing support structures; the moving bulk is lower allowing a higher round trip speed; transport and installation is easier.
It is possible to connect the arm to different gripping heads, able to handle either single or multiple packs, as required by the project:
Production capacity: up to 133 ppm (with 2 heads).
Gripping head of the layer preparation system Polaris EVO
Agilis is a palletizer with high level product infeed and a vertical lift pallet loading system. Depending on the production speed required it’s possible to configure a single, double or triple infeed with row preparation on positive belts. Agilis is also available with a pack divider or manipulator to speed-up the production and/or to secure uns...
Low level infeed mono–column type palletizer Artis EVO features a steady pallet loading system and an innovative layer pick-up head. It is suitable for medium/high production capacity.
Fluens is a palletizer with a low level product infeed and a vertical lift pallet loading system; by this configuration Fluens is able to provide palletization for medium-high-speed operations at over eight layers/min. A high level infeed model is also available, achieving a production speed of over ten layers/min.
Low level infeed palletizer Opera with steady pallet loading system is suitable for low/medium production capacity.
Proteja las operaciones de su planta aséptica de bebidas y la calidad final de su producto mediante el control de los riesgos asociados con cada parámetro de proceso de un sistema de llenado aséptico.
Descubra GEA Service con tres niveles de asistencia remota profesional para sus plantas de llenado de bebidas.
Descubra GEA eShop Filling, una interfaz fácil de usar para pedir en línea piezas de repuesto para llenado las 24 horas del día.
Descubra GEA Smart Filling, una plataforma de aplicación web/móvil totalmente integrada en la que podrá encontrar respuestas a todas sus necesidades de servicio.
Cuando el productor surcoreano de alimentos de origen vegetal Pulmuone planteó a GEA el reto de desarrollar un giro moderno del tradicional fideo frío masticable (naengmyeon), los expertos en I+D de GEA estuvieron a la altura. Ayudaron a crear lo que ahora es un éxito comercial producido con menos agua y electricidad que los métodos antes existentes. El resultado también es fiel a los orígenes tradicionales del plato, así como a las raíces de salud, bienestar y sostenibilidad de Pulmuone.
El innovador proceso de GEA marca un hito en el pretratamiento de biocombustibles como el aceite vegetal hidrotratado y el combustible de aviación sostenible. Al eliminar el proceso de decoloración, los fabricantes se benefician de un importante potencial de ahorro: más de un 50% menos de costes operativos y hasta un 12% menos de emisiones de CO2.