The ammonia dryer heats the aqueous ammonia, boiling the ammonia out of the water. It can be done either with an electric or hot gas heater. The distilled ammonia flows out of the dryer and is fed back into the separator. At the end of the cycle, the controls start the next filling and distillation process. Only after the water concentration in the container sump reaches the defined value, will the cycle end and the manual drain valve open. The remains which may contain sludge in addition to aqueous ammonia are directed to the prepared canister and then disposed of. Signal lights on the operator panel provide information about the relevant operating status of the dryer.
Type | Input power
(kW) | Dimensions (mm) | Weight
(kg) | ||
L | W | H | |||
150 H¹) | 0.2 | 2200 | 750 | 1000 | 500 |
150 E²) | 1.8 | 2200 | 750 | 1000 | 500 |
¹) hot gas heating, ²) electric heating
A refrigeration plant can have water levels of approximately 2% to 5% within a few years despite regular care. Due to the very different evaporating temperatures of water and ammonia, even very slight increases in water concentrations may increase the evaporating temperature of the ammonia water mixture. If the suction pressure alters the evaporating temperature of the aqueous ammonia, i.e. the intended temperature in the cooling chambers can no longer be achieved. This effect is compensated through lowering the suction pressure which in turn compromises the capacity of the compressor. To guarantee the specified cooling capacity, the operating hours of the compressor need to be increased, raising the operating costs for the refrigeration system. In addition, the water in the ammonia circuit causes corrosion as well as the oil to age faster and accelerates sludge formation in the refrigeration system. To prevent overmoisturizing over your refrigeration system we thus recommend using the GEA Grasso Ammonia Dryers.
Learn more with GEA RTSelect – our product selection and configuration tool.
Update your existing screw compressor packages
スクリュー/ピストンコンプレッサーコントロールのための直感的な操作性高性能でありながら、親しみやすい。知的なデザイン設計でありながら、直感的操作が可能高機能でありながら、シンプルな操作シンプルに – GEA Omni
PR-OLEO® 高品質アンモニア冷凍機油は、高度に精製された二段階水素化分解潤滑油で、往復圧縮機またはスクリュー圧縮機を搭載したアンモニア冷凍システム用として特別に考案されました。
効率性を高め、各業務用冷凍設備の特性を強化します。
The GEA Ammonia Dryer removes water from the refrigerant cycle and makes the perfect addition to ammonia refrigeration systems along with filters and purgers.
Welcome to the world of simplicity with GEA Service Kits for reciprocating compressors. Our mission is clear - to make your experience with original spare parts seamless and your operations smoother than ever. "Take it easy, use a kit" is not just a tagline – it is a promise we deliver on.