Control and Feedback Systems
Control top T.VIS® E-20
The T.VIS® E-20 is the perfect control top to be used in explosive gas and dust atmospheres.
The T.VIS® E-20 is specially designed to meet the requirements of the liquid processing industry as well as dust explosion protection. In addition, all components of this control top are standardized to the utmost degree. This ensures the simplest and most time-saving handling with high reliability and safety. The technology of the T.VIS® E-20 is based on two separate, magnet-based sensors combined in one sensor module. They are used to detect the valve position and provide the corresponding feedback signals for automated plant operation. The sensor module also provides the optional connection for the pilot solenoid valves to control the valve actuators.
Features
- Proven housing technology and standardization of component use
- Highest protection class as standard
- High vibration and shock resistance
- Easy commissioning
- 2-color 360° status identification
- Certifications for worldwide use
Structure
The T.VIS® E-20 has 2 position sensors integrated in a compact module as standard. The LEDs, which are also integrated, enable status identification by means of the illuminated dome incorporated in the control top cap. The required cabling by the customer to the necessary operating equipment and therefore ensuring the intrinsically safe operation of the control top is achieved by direct wiring to internal spring-loaded terminals, both for the feedback signals and for the valve activations. The supply air connection is equipped with a replaceable filter to protect the built-in solenoid valves.
Position detection
Two manually adjustable sensors for detection of the valve positions for start/safety and end position.
Settings
The sensors are mounted on guide blocks and can be individually adjusted over the entire stroke of the valve via two threaded spindles integrated in the sensor module.
Visualization
LED display
- green: valve in non-actuated position
- yellow: valve in end position
Field of application
Approved for use in the following applications:
| Type of conformity | ATEX/UKEX/IECEx/CCCEx |
| Application | |
| Gas | (II 2G) Ex ia IIC T4…T5 Gb |
| Ambient temperature | -10 °C ≤ Ta ≤ +42 °C |
| Dust | (II 2D) Ex tb IIIC T85 °C Db |
| Ambient temperature | -10 °C ≤ Ta ≤ +38 °C |
All certifications are based on use in gas and dust atmospheres, covering the requirements for equipment category 2 (EPL b).
Technical data
| Technical data of the standard version | ||
| Position detection | Magnetoresistive proximity switches | |
| Housing material | PA 12/L | |
| Air supply | Pressure range | 2 to 8 bar |
| Standard | acc. to ISO 8573-1:2010 | |
| Solid content | Quality class 6 | |
| Water content | Quality class 4 | |
| Oil content | Quality class 3 | |
| Dimensions of air connections | Metric 6/4 mm, inch 6.35/4.31 mm (¼") | |
| Protection class | IP 69 | |
| Sound pressure level
via exhaust air throttle | Max. 72 dB | |
| Visualization | LED (green, yellow) | |
| Certificates | ATEX, IECEx, UKEx, CCCEx | |
Valve and plant automation
Downloads
İlgili Ürünler
Kontrol Kafası T.VIS® A-15
Hassas bir algı sistemine sahip T.VIS® A-15, bir T.VIS® kontrol kafası ile donatılabilen herhangi bir GEA vanası ile otomatik açık/kapalı konumu algılama özelliği sunmaktadır.
Kontrol Kafası T.VIS® M-20
GEA T.VIS® M-20 kontrol kafası, çoğu uygulama noktasında ihtiyaç duyulan modern kontrol fonksiyonlarının tamamına ek olarak, otomatik vana devreye alma ve verimli ekipman yönetimi bakımından ek avantajlar sunmaktadır.
Control Top T.VIS® P-15 - Pozisyon Kontrolörü
T.VIS® P-15, pnömatik proses vanaları için kompakt bir pozisyon ayarlayıcıdır. Konum bir pozisyon sensörü ile tespit edilir ve iki entegre solenoid vanası tarafından ayarlanır.
Yaklaşma Anahtarı Tutucuları
0 Bağlantısı, INA, LAT
GEA İçgörüleri
Geçmiş ve gelecek, Lemgo’nun öncü bölgesel ısıtma projesinde bir araya geliyor
Otomasyon inekler, insanlar ve gezegen için fark yaratıyor
