WVR-SVU, WVR-SVA Dual Safety Valves and WVR SVA / SVU Dual Safety Valves with Chain Drive
GEA dual safety relief valves are designed for installation in the refrigerant cycles of industrial refrigeration systems. The safety valves which are dependent of back pressure protect refrigeration systems and their components from excess pressure (see also EN 378 part 2). They comply with the technical regulations of the German Technical Control Board (TÜV) and with AD2000 regulations. Once the set response pressure is reached GEA safety valves begin to open. They open within a 10 % pressure increase until the designed limit of the lift is reached. When the pressure drops again they start closing once the set response pressure is reached. They close completely within a pressure drop of 10 % below the set response pressure. The 3-way valve enables easy checks and maintenances of the safety valves without the system’s operation to be interrupted. One of the two outlet nozzles is always open whereas the other one is closed. So one safety valve can be inspected or even disassembled while the other one remains in service to protect the system.
WVR AL SVA / SVU Dual Safety Valves
They are available with safety valves either back pressure dependent or independent to protect the refrigeration systems and their components from excess pressure (see also EN 378 part 2). They comply with AD2000 regulations. After their initial response GEA safety valves open within 10 % of pressure increase up to the designed limitation. They close within a pressure drop of 10 % below the response pressure. The 3-way valve enables easy checks and maintenances of the safety valves without the system’s operation to be interrupted. One of the two outlet nozzles is always open whereas the other one is closed. So one safety valve can be checked or removed while the other one remains in service to protect the system. The compact design of the WVR AL requires minimum space and enables horizontal and vertical assembly. Compared to steel and stainless steel valve types the weight could be reduced by up to 30 % by using salt-water resistant aluminum EN AW-6082 as body material.
Technical Features
- 3-way valves are made of aluminum, safety valves are available in steel or stainless steel
- Selection of body material as per German DIN EN12284, AD2000 Series W
- Working mediums: refrigerants as per EN 378 p. 1, e.g. NH3, R134a, R290 (propane), R507 and blends with refrigerator oil; neutral, gaseous and liquid mediums; glycol-based cold brine
- Installation position: vertical as per AD2000-leaflet A2 and horizontal
- Available valve seat seals (for safety valves):
- WVR-SVUA / WVR-SVAA / WVR AL-SVAA / WVR AL-SVUA : PTFE seal, can be used at temperatures of -60 °C to +180 °C, cannot be used for response pressures of less than 10 bar.
- WVR-SVUB / WVR-SVAB / WVR AL-SVAB / WVR AL-SVUB: elastomer seal, can be used at temperatures of -50 °C to +110 °C
| WVR-SVA Dual
Safety Valves | WVR-SVU Dual
Safety Relief Valves | WVR AL SVA / SVU Dual
Safety Valves | WVR SVA / SVU Dual
Safety Valves with Chain Drive | |
| material | steel or stainless steel | steel or stainless steel | aluminum (3-way valve) steel
or stainless steel (safety valves) | steel or stainless steel |
| nominal size (inlet\outlet) | DN 15/15 – 65/100 | DN 15/15 – 65/100 | DN 15-32 | DN 15-100 |
| nominal pressure level | PS 25, PS 40, PS 63 | PS 25, PS 40, PS 63 | PS 25, PS 40, PS 63 | PS 25, PS 40, PS 63 |
| temperature range for
standard valves | WVR-SVAA: -60 °C to +180 °C
WVR-SVAB: -50 °C to +110 °C | WVR-SVUA: -60 °C to +180 °C
WVR-SVUB: -50 °C to +110 °C | WVR AL-SVAA / SVUA: -60 °C to +180 °C
WVR AL-SVAB / SVUB: -50 °C to +110 °C | WVR SVAA / SVUA: -60 °C to +180 °C
WVR SVAB / SVUB: -50 °C to +110 °C |
| connection | flanged ends as per DIN and ANSI
threaded ends | flanged ends as per DIN and ANSI
threaded ends | flanged ends as per DIN and ANSI
| flanged ends as per DIN and ANSI
|
| additional information | available with bursting discs,
bursting disc holder and excess flow valve | available with bursting discs,
bursting disc holder and excess flow valve | available with bursting discs,
bursting disc holder and excess flow valve | available with bursting discs,
bursting disc holder and excess flow valve |
Safety Valve Combinations type WVR-SVA & WVR-SVU
Downloads
服务产品
PR-OLEO® 优质氨制冷润滑油
PR-OLEO® 优质氨制冷润滑油是高度精制的 2 阶段氢化裂解润滑剂，采用专门配方制成，可在采用往复式压缩机或螺杆压缩机的氨制冷系统中使用。
GEA 氨干燥机
制冷系统的实用补充设备。氨干燥机可从制冷剂循环中除去水分，它与过滤器和放空气器一起成为氨制冷系统的完美补充。
GEA Service Kits for reciprocating compressors
Welcome to the world of simplicity with GEA Service Kits for reciprocating compressors. Our mission is clear - to make your experience with original spare parts seamless and your operations smoother than ever. "Take it easy, use a kit" is not just a tagline – it is a promise we deliver on.
GEA 洞察
定制挤奶设备支持奶牛和农场主的福祉
健康快乐的奶牛是成功和可持续牛奶生产的关键。因此，保持奶牛健康是每个奶农努力的核心。奶牛的健康受到许多因素影响，例如根据奶牛个体需求进行适当喂养、良好的饲养条件以及新鲜的空气、水和光照。而且，挤奶方式对奶牛的健康状况也有很大的影响。GEA 因其“优质挤奶理念”而闻名，不断致力于进一步发展，并在动物健康和牛奶质量方面取得更好的成果。
利用 GEA 的整体工程解决方案实现净零排放
各行各业都在努力实现净零排放目标，同时遵守严格的脱碳法规和立法。与此同时，公司必须平衡日益增长的质量、产品开发和工艺优化需求，此外，还必须努力提高盈利能力。应对这一挑战需要采取 GEA 提供的协作和整体方法。
在餐桌上享用…新食品：打造我们食品的未来
咖啡、可可、牛奶、肉类、鱼类和蛋类 - 这些日常主食在很大程度上依赖集约农业。随着新食品技术的兴起，我们有了更多可持续的替代品。我们采访了 GEA 液体、发酵和灌装部门的高级副总裁 Reimar Gutte 博士，探讨其中的可能性和政策。
