Retracting Cleaners
In-Line Sprayer IS 25
The In-line Sprayer IS 25 is equipped with a spray head that is withdrawn from the product chamber during production, called Retractor, that is pneumatically pushed out during the cleaning. This design makes the IS 25 very suitable for the cleaning of tanks with moving components, such as agitators. For pipe CIP using large amounts of solvents as cleaning medium, the use of inline sprayers reduces the costs for cleaning considerably.
Applications
Due to its equipped spray head that is pneumatically actuated and pushed out and pulled-in after the cleaning cycle by spring, the In-Line Sprayer IS 25 is perfectly suitable for the cleaning of tanks with moving components. It ensures a professional and sustainable cleaning result within applications for instance with agitators.
Advantages
- Operational safe in function and process
- Can be validated
- Spring-closing, pneumatic opening
- Vacuum resistant up to -0.9 barG
- Feedback of both actuated positions
- Proximity switch holder for feedback or control module
- Allowed in ATEX Zone 0G/20D, but with control module made of Vestamid
- Seal rings in: EPDM/FKM or solvent resistant FFKM
- Surfaces in contact with CIP and product Ra ≤ 0.8 μm
- FDA conform
Applications
Due to its equipped spray head that is pneumatically actuated and pushed out and pulled-in after the cleaning cycle by spring, the In-Line Sprayer IS 25 is perfectly suitable for the cleaning of tanks with moving components. It ensures a professional and sustainable cleaning result within applications for instance with agitators.
Technical data
| Item | Size |
|---|---|
| Recommended pressure | 1.8 - 2.5 bar (26.1 - 36.3 psi) |
| Cleaning diameter | max. 1.6 m (5.2 ft) |
| Flow rate | 2.9 - 5.4 m3/h
48.3 - 90.4 l/min. 12.8 - 23.8 USpgm |
| Spray pattern | 192° - 360° |
| Materials: product wetted
Materials: not product wetted | 316L (1.4435) with EPDM / FKM or FFKM
304 (1.4301) with NBR |
| Weight | approx. 6 kg (13.23 lbs) |
Downloads
GEA Insights
Feeding the future: The power of freeze-drying innovation
Waste reduction is important to us at GEA, and by harnessing the power of freeze drying technology, we can transform surplus food into valuable, long-lasting products – helping to reduce waste, extend shelf life and build a more resilient food supply for generations to come.
GEA and Pulmuone honor generations of cold noodle craftsmanship
When plant-forward South Korean food producer Pulmuone brought GEA the challenge of developing a modern spin on the traditional chewy cold (naengmyeon) noodle, GEA’s R&D experts were up to the challenge. They helped develop what is now a commercial hit produced with less water and electricity than previously existing methods. The result is also true to the traditional origins of the dish as well as Pulmuone’s health, well-being and sustainability roots.
