High Capacity Centrifugal Pump
Maxi-Pump
High capacity centrifugal pump transferring water, hog slurry or very liquid manure, from different kinds of storage. The Maxi-Pump provides maximum pumping head and comes with different features to make manure management easier.
Key Features
- 3-point hitch with adjustable legs;
- 20" (508 mm) or 28" (711 mm) diameter impeller with 6 blades;
- Bearing assembly in oil bath protected by a 3 seal mechanism;
- Intake flapper valve with thick rubber to seal against a stainless steel pipe;
- 6" (152 mm) intake and discharge.
Options
- Maxi-Pump on trailer;
- Hand primer pump with 6" (152 mm) gate valve;
- Hydraulic motor on primer pump.
Maxi-Pump and Side Mount Agitator Kit
- Powerful surface and bottom agitation for fast mixing of manure;
- A 12" (305 mm) diameter rubber hose is installed between the Maxi-Pump and the reservoir to absorb vibrations.
Note: The Maxi-Pump can be installed above ground level to keep the environment clean and aid in draining the pump once the reservoir is empty.
Maxi-Pump and 45° Port Hole Agitator
- Positive agitation to minimize solid residue between the port holes of the pit;
- Loading capacity of up to 1 500 GPM (5 678 L/min.);
- Easily transfer to the spreader with the 6" (152 mm) X 20 foot (6 m) loading pipe on tripod with 45° elbow.
Maxi-Pump and Solid Manure Platform
- This configuration allows siphoning of the liquid alongside the wall of the platform to fill a liquid manure spreader;
- Reduces the time required to load manure.
Related Products
Articulated Agi-Pompe
The concept of the articulated pumps offered by GEA is to have the pump attached to the tractor with a solid 3-point hitch and two hydraulic controlled articulations allowing positioning the pump into a lagoon or a concrete pit.
Articulated Super Pump
The Articulated Super Pump allows far-reaching access into concrete pits and provides power entirely concentrated on manure pumping.
Irrigation Pumps
Transfer liquid manure of a maximum consistency of ¼" (6 mm) at very high pressure.
Lagoon Agi-Pompe CA8
This model of lagoon Agi-Pompe is especially designed to manage manure in deep lagoons.
GEA Insights
Bringing centrifuges up to speed with sustainability
Every drop and every kilowatt hour count when it comes to centrifuge development.
GEA has been building centrifuges for over 130 years – something you wouldn’t think is in question every day. Jürgen Mackel, Vice President...
GEA’s solar journey: powering a sustainable future
Through investments in renewable energy, GEA is lowering its CO2 emissions around the world.
Decarbonizing processes with industrial heat pumps
When it comes to improving the health of the planet, GEA takes a leading role. As one of our sustainability-focused strategic objectives, we are forging a path to help our customers across myriad industries to reduce energy use...
