Aseptomag® valve line
Leakage Valves Aseptomag® LV
Aseptomag® leakage valves are used for the mixproof shut-off of incompatible products at pipe junctions in UltraClean processing plants.
Main Components
Housing
Housing for leakage valves are available with two, three, or four connection ports. The valves are produced with butt-weld connections by default. Mixed port connection sizes as well as various aseptic pipe connections are available upon request.
Internal Assembly
The internal assembly is equipped with a hard TEFASEP® seal for the axial, and an EPDM seal for the radial valve seat by default. In addition to the standard sealing material, an o-ring made of PTFE is optionally available for the axial valve seat seal.
Actuator
The pneumatic actuator for the leakage valves LV is made of stainless steel and designed to be spring-closing/air-opening (NC). In addition to the full stroke, the standard design allows both valve seats to be lifted independently (EA). Optionally, the valve can be configured with an actuator where only the radial valve seat A can be lifted independently (AZ).
Clamp
Due to its solid construction, the GEA Aseptomag® clamp enables a pressure stable and safe connection of the main components. The special design with three segments allows a service-friendly handling of the component, even under tight space conditions.
Feedback units
UltraClean leakage valves can be either equipped with open feedback units or T.VIS® feedback systems by default. Feedback units from third party suppliers can be mounted via special adaptors.
Options
Aseptomag® Leakage Valves can be executed with an additional steam connection (DA), which enables intermediate steam flushing of the leakage area independent from any seat lifting.
Furthermore, a mechanical backstroke barrier (RSS) can be mounted on top of the pneumatic actuator. This unit interacts with the radial valve seat A and is used as an additional safety feature to maintain the mixproof valve functionality even in the event of pressure hammers up to 50 bar.
Technical data of standard execution
| Item | Size |
| Nominal pressure valve | 10 bar |
| Closing pressure | 6 bar |
| Control air pressure | 6 bar |
| Hermetic sealing element | Stainless steel bellows |
| Valve seat seal material | TEFASEP® / EPDM |
| Housing seal | EPDM |
| Surface quality in product area | Ra ≤ 0.8 |
| Material quality in product area | AISI 316L / AISI 316Ti |
| Max. operating temperature | 135 °C (275 °F) |
| Max. sterilization temperature | 150 °C (302 °F) for max. 30 min. |
For further information about the application of this valve type please refer to the tab Aseptomag® valve line.
Aseptomag® valve line
Aseptomag® Valve Technology
Double-chamber valve Aseptomag® DK – valve matrix
Aseptic bellows valves distinguish themselves with the uncompromisingly hermetic seal of the valve stem, thereby minimizing contamination risks and maximizing detection possibilities. The Aseptomag® valve line is the equivalent for sensitive process areas to the hygienic VARIVENT® valve line and provides everything from shut-off and bottom-seat to mixproof and sampling valves. The valves meet the highest hygienic standards and consider design guidelines such as EHEDG and 3-A standards. Thanks to the modular structure, the Aseptomag® valve line also allows tailor-made valve solutions for specific process requirements (higher closing pressures, special materials, special design, etc). Aseptomag® valves can be equipped with T.VIS® control tops and can therewith seamlessly be integrated into an automated process plant.
UltraClean Applications
Unlike the other valves in the Aseptomag® series, the main focus of the Leakage Valve LV and LVBS is not on purely aseptic but UltraClean applications. The most relevant product parameter for UltraClean applications is shelf-life. It is mostly determined by the pH-value and the aw-value of the product. In addition, sensory properties need to be considered as well as the logistical chain of distribution. One of the advantages of UltraClean processing is the reduced quantity of preservatives needed for maintaining the shelf-life of the product.
Application examples
- Dairy industry – Milk-based and lactic acid-fermented products (e.g. ESL milk, dessert products, crystallizing products such as lactose)
- Beverage industry – Water-, fruit and plant-based beverages (e.g. soft drinks, fruit juice, soy milk)
- Food industry – Sauces and delicacies
- Brewery industry – Beer and mixed beer beverages (e.g. pure yeast cultivation)
Aseptomag® LV / LVBS at a glance
- Hermetic sealing by stainless steel bellow
- Uncompromising detection possibilities
- Easy and safe maintenance
- Ideal fit for UltraClean mixproof applications
Aseptomag® valve types and sizes
| Valve type | Metric | Inch OD |
| Shut-off Valves Aseptomag® AV | DN 15 – DN 150 | 0.75” – 6” |
| Shut-off Valves Aseptomag® AVBS | DN 15 – DN 150 | 0.75” – 6” |
| Divert Valves Aseptomag® UV | DN 15 – DN 100 | 0.75” – 4” |
| Shut-off Valves Aseptomag® AF | DN 25 – DN 100 | 1” – 4” |
| Control Valves Aseptomag® RV | DN 15 – DN 100 | 0.75” – 4” |
| Control Valves Aseptomag® RVIN | DN 25 – DN 65 | 1“ – 2.5“ |
| Back-pressure Valves Aseptomag® GD | DN 15 – DN 150 | 0.75” – 6” |
| Shut-off Valves Aseptomag® AMV | DN 06 – DN 10 | 0.25” – 0.5” |
| Leakage Valves Aseptomag® LV | DN 25 – DN 100 | 1“ – 4“ |
| Leakage Valves Aseptomag® LVBS | DN 25 – DN 100 | 1“ – 4“ |
| Leakage Valves Aseptomag® ADV | DN 25 – DN 100 | 1” – 4” |
| Double-chamber Valves Aseptomag® DK | DN 25 – DN 150 | 1” – 6” |
| Double-chamber Valves Aseptomag® DKBS | DN 25 – DN 150 | 1” – 6” |
| Double-chamber Valves Aseptomag® DDK | DN 25 – DN 150 | 1” – 6” |
| Double-chamber Valves Aseptomag® AXV | DN 25 – DN 150 | 1” – 6” |
| Sampling Valves Aseptomag® PV | DN 10 – DN 15 | 0.5” – 0.75” |
| Steam inlet valves Aseptomag® DE | DN 25 – DN 40 | 1” – 1.5” |
| * Additional valve sizes and connection standards (i.e. ISO) available upon request | ||
Downloads
Related Products
Back-pressure Valves Aseptomag® GD
Back-pressure valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design.
Control Valves Aseptomag® RV
Control valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design.
Control Valves Aseptomag® RVIN
Control valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The inverted control valve is specifically designed for installations where product enters the valve from the bellow side.
GEA Centrifuge Water Saving Unit
Compact unit to limit the water consumption for cooling purposes of centrifuges
GEA Insights
A strategy for the better: CEO interview on GEA's Mission 30
After reaching its Mission 26 targets two years early, GEA launches Mission 2030 strategy with focus on growth, value and making a positive impact.
Blu-Red software accelerates climate-friendly energy tech
As more communities and businesses rely on district heat pump plants and climate-neutral refrigeration technology, ensuring they provide a continuous supply is of vital importance. GEA’s InsightPartner Blu-Red Care management...
Shaping the future of sustainable wood fiber insulation production
Committed to bring Swiss production of wood insulation boards back to life, Lignatherm AG is counting on GEA’s innovative three-stage solution for water treatment to recycle nearly 100% of effluent water from wood fiber manufacture....
