Varipond C for clarifying decanters
Changing the diameter means changing the position of the eccentric centripetal pump. The pump position adjusts the pond depth and with it the lengths of the clarification and dewatering zone inside the bowl.
The longer the clarification zone the clearer the liquid, the longer the dewatering zone the drier the solids.
Varipond C for separating decanters
In separating - or 3-phase - decanters you can easily adapt the separation zone inside the decanter bowl. In 3-phase systems you have two liquid phases and one solids phase, i.e. water, oil and solids.
As the composition of the feed is constantly changing, the optimum setting for the separation zone is changing constantly, too. With Varipond C for 3-phase systems you can easily adapt your separation zone to those changing feed conditions.
The composition of the product you feed into your decanter is not always the same, especially if you are processing naturally grown products. Water, oil and solids contents vary because of i.e. weather, time - or rather: how fast you process your feedstock – or the operation of previous process stages. To always get the best separation results you have to adjust the separation zone inside your decanter according to the those feed conditions.
Adjusting your GEA decanter has never been easier than with Varipond C. Just select the respective diameter – manually or automatically – and the position of the eccentric centripetal pump adjusts pond depth and/or separation zone inside the bowl.
With GEA Varipond C adjusting your decanter to changing feed conditions, a varying flow rate or even different feedstocks can be done instantly and directly at the running machine.
Thus, making sure you always have the best separation results is
- Easy
- Fast
- Precise
- And easily repeatable.
Because, with GEA Varipond C you can even program and save recipes in your control system to make your decanter run in the optimum operation mode, literally at the touch of a button.
This is how your separation zone becomes a true a comfort zone.
On top, GEA Varipond C is energy efficient due to less friction taking place at the centripetal pump, comes in hygienic design so it can be easily used in all beverage and food applications and is available for our entire decanter fleet for you to scale up your good experience with it.
And good news for all our beverage customers: you can even combine Varipond C with hydrohermetic sealing making sure your job will become much easier in future, even if you need a decanter system that prevents your product from oxygen pick-up.
Comfortable and easy
Easy, fast and precise adjustment of decanter settings, even recipes possible
Highest yields
Whatever product or product composition, always run the decanter at its operational optimum
Hydrohermetic sealing
Combination with hydrohermetic sealing possible
Energy efficient
Low friction at centripetal pump
Food grade
In accordance with hygienic design guidelines
Scaleable
Available for the entire decanter fleet – if you know one, you know them all
Downloads
Produits associés
2-Phase Separating Decanter dryMaster
For clear clarification and dewatering in chemical and mineral processing applications. The clarified liquid is discharged freely into a liquid catcher and flows off under gravity. CIP-compatability of the decanter can be assured.
2-Phase Separating Decanter chemMaster
For clear clarification and dewatering in chemical and mineral processing applications. The clarified liquid is discharged under pressure by use of a centripetal pump. CIP-compatability of the decanter can be assured.
2-Phase Separating Decanters for Oil Recovery
The big advantage of the 2-phase separating decanter for olive and palm oil recovery is the enormous savings when it comes to dilution water.
3-Phase Separating Decanters for animal and fish by-products
For the recovery of fish oil, proteins and meal
Prestations de services
ERU à distance pour centrifugeuses GEA
Il n'est pas possible d’effectuer l’essai de réception en usine (ERU) de votre centrifugeuse sur le site à cause des restrictions aux voyages actuelles, d’un emploi du temps très chargé ou d’une autre raison urgente ? Vous avez l’habitude de toujours rechercher des manières de rendre vos processus métiers plus digitaux, de réduire considérablemen...
GEA SAFEXPERT®
Un service de consulting et diagnostic de procédés novateur.
Réseau de réparation international pour les centrifugeuses GEA
Réparations correctives pour vos séparateurs et décanteurs GEA
GEA Insights
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Au-delà des machines : exploiter les gisements de performance des installations
Ce n'est pas parce que vous avez des machines efficaces que votre usine l'est. Une trajectoire d'amélioration efficace commence souvent par une analyse qui ne se limite pas aux équipements pris individuellement, et cherche à comprendre comment les processus, les systèmes énergétiques et les décisions opérationnelles s'influencent mutuellement. C'est une démarche holistique, conçue pour repérer des opportunités qui, sans cela, risqueraient de passer inaperçues.
Comment une vanne révolutionne la production des aliments et des boissons
Dans les installations agroalimentaires, les vannes sont généralement actionnées en utilisant de l'air comprimé. La technologie d'actionnement GEA Hydract® Actuation Technology, quant à elle, actionne les vannes en utilisant de l'eau, au sein d'un circuit fermé à commande numérique. Résultat, une vanne peut être maintenue en place de manière exacte et réglée par petits paliers. Cela se traduit par une consommation d'énergie en baisse et un meilleur contrôle.
