Specific emission control processes
Bubble column reactor
Bubble Columns allow to conduct and control chemical reactions in the liquid phase. Bubble Columns are often used when the liquid-phase reactions are rather slow in relation to the gas absorption rate.
In comparison to other gas/liquid contactors (e.g. spray or packed columns), Bubble Columns feature a high liquid to gas volume ratio. This is beneficial when conducting rather slow reactions in the liquid phase as large reaction volumes can be realized.
Due to the high liquid inventory of the system the temperature of the reaction can be controlled very effectively, which is an advantage when temperature sensitive substances are to be produced.
Bubble Columns are also an ideal absorption system when dry spots must be avoided in the contactor (e.g. when crystallization can occur), which can cause blockages in conventional mass transfer equipment. GEA has developed a special non-blocking gas sparger design in this respect.
Furthermore, Bubble Column Reactors offer other benefits such as a simple operation without any moving parts; excellent mixing, high heat and mass transfer rates; low catalyst attrition rates and the ability to accommodate a wide range of residence time requirements.
Key features
- No internals needed
- Higher liquid content in the system compared to e.g. spray or packed columns
- Gas phase = disperse phase
- High enthalpy inventory generates a robust dynamic behavior
- Various gas sparger designs possible
- Static equipment, meaning low maintenance effort
Working Principle
Working Principle of Bubble Column
Bubble Columns are gas/liquid contactors in which the gas phase is the disperse phase, meaning the gas phase is distributed into the liquid at the bottom of the column by an appropriate distributor and then moves upwards in the form of bubbles causing an intense intermixing of the gas and the liquid phase in the system.
In a Bubble Column the gas is sparged into the liquid in the form of bubbles without mechanical agitation. The configuration of a gas sparger is important since it determines the properties (e.g. size) of bubbles, which in turn affect gas holdup values and other parameters related to Bubble Columns.
Bubble Columns can be used for either absorption of gases into liquids, conducting chemical reactions in the liquid phase with or without an additional catalyst, simply mixing two or more phases or when liquid reactant products are to be stripped out of a liquid phase.
Downloads
Produits associés
Spray Drying Evaporation
GEA's spray drying evaporation is a simple process that requires limited attention from the operator while maintaining high reliability. It can be easily integrated with either existing or new WFGD.
Heavy metal removal
Environmental pollution of heavy metals is increasingly becoming a problem and global concern. In addition to the calomel process, often used in the field of non-ferrous metal production, GEA uses wet Electrostatic Precipitators (ESP), Spray Drying Absorption (SDA) and Ceramic Catalyst Candles (BisCat) to reduce heavy metals from flue gas.
Converter gas recovery (LT process)
The conversion of hot metal into steel produces CO-laden gases of high caloric value. The recovery of these gases means to save a considerable amount of energy. The LT-Steel Gas Process has established worldwide.
Absorbeur-PE GEA
Une de nos principales branches d'activité dans l’industrie du raffinage est le nettoyage des gaz pour les unités de craquage catalytique fluide (CCF). Les technologies de GEA associent ingénierie des procédés, aspects environnementaux et économies d’énergie. GEA prend tous ces éléments en compte pour élaborer des solutions d'air propre, qui main...
GEA Insights
GEA Service : Le réseau vital qui soutient des lignes de production dans le monde entier
Un paquet de spaghettis sur quatre, un litre de bière sur deux et un quart de tout le lait traité dans les élevages laitiers dépendent de machines GEA. Quand vos lignes de production ont besoin d’attention, GEA Service intervient...
Une nouvelle usine de pompes polonaise redéfinit la fabrication hygiénique
Les installations de GEA à Koszalin en Pologne constituent une nouvelle référence dans le secteur de la production de pompes hygiéniques. Ce site polyvalent s’appuie sur des dizaines d’années à la pointe de l’ingénierie allemande,...
