Palletizers & Depalletizers

Layer Preparation System Polaris EVO

The layer preparation system Polaris EVO is equipped with pack gripping heads that move and/or rotate packs to their required position, in order to prepare a whole layer of products according to a pre-defined pattern.

The Polaris EVO system allows the preparation of a whole layer of products avoiding shocks thanks to a gentle handling. Polaris EVO has a continuous working mode, without any interruption between each layer preparation, allowing the speed capacity of the downstream palletizer to be optimized.

Polaris EVO is a modular system that can be installed as a single unit (for medium-speed lines) or in series (for high-speed lines and/or complex palletizing patterns).

The new handling robot operates in a SCARA-based configuration (Selective Compliance Assembly Robot Arm).  This allows the handling grip to move along a horizontal axis (x-y) only thereby excluding gravity and reducing inertia. A third vertical axis can be used to adjust the grip height (format changeover). To reduce the load on the arm the main motors and are located in the fixed part of the robot and are assembled opposite each other on the same axis.

SCARA configuration guarantees the following advantages compared with traditional Cartesian systems: the footprint is more compact; there is better visibility and easier access for the operator as there are no obstructing support structures; the moving bulk is lower allowing a higher round trip speed; transport and installation is easier.

It is possible to connect the arm to different gripping heads, able to handle either single or multiple packs, as required by the project:

  • Pneumatic gripping head: gripping head with lateral plates coated in shock-proof material. Pantograph type lateral opening and lifting, pneumatically activated.
  • Motorized gripping head: self centering gripping head completely motorized to eliminate air consumption. The head is able to pick the packs up, both from the front or side, allowing high speed performance and complete gripping flexibility. The vertical movement of the plates is totally independent.
  • Gripping head with plate overtake cycle: the system (patent pending) has been designed to reduce the downtime due to plate repositioning phases creating high working cycles. The head is able to pick the packs up, both from the front or side, allowing a complete gripping flexibility. The vertical movement of the plates is totally independent.

Production capacity: up to 133 ppm (with 2 heads).

Gripping head of the layer preparation system Polaris EVO

Gripping head of the layer preparation system Polaris EVO

Downloads

Insights da GEA

Tailored milking equipment supports cow and farmer well-being

Healthy and happy cows are the key to successful and sustainable milk production. Keeping their cows healthy, therefore, is at the heart of every dairy farmer’s effort. Many factors influence the well-being of a cow, such as...

Alcançando net-zero com as soluções integrais de engenharia da GEA

As indústrias em geral estão trabalhando arduamente para atingir as metas de net-zero enquanto navegam por exigentes regulamentações e legislações sobre descarbonização. Ao mesmo tempo, as empresas precisam equilibrar as crescentes...

À mesa para ... New Food: Elaborando o futuro de nossos alimentos

Café, cacau, leite, carne, peixe e ovos - esses produtos básicos do cotidiano dependem grandemente da agricultura intensiva. Com o surgimento de novas tecnologias de alimentos, temos alternativas mais sustentáveis. Nós nos reunimos...

Receba notícias da GEA

Mantenha-se atualizado com as inovações e histórias da GEA, se registrando para receber notícias sobre a GEA.

Entre em contato

Estamos aqui para ajudar! Com apenas poucos detalhes poderemos responder à sua pergunta.