Midstream
Tank bottom treatment is essential in the oil and gas industry to recover valuable hydrocarbons and minimize environmental impact. Effective cleaning and processing of tank bottoms ensure efficient oil recovery while reducing waste and disposal costs.
Tank bottoms refer to the residual sludges and sediments that accumulate at the bottom of storage tanks used in the oil and gas industry. These sludges contain a high percentage of recoverable oil, making them valuable products. However, they are known for being difficult to handle due to their high solids and emulsion content as well as their high viscosity.
Proper treatment of tank bottoms is crucial not only for recovering valuable hydrocarbons but also for minimizing environmental impact and reducing waste disposal costs. Untreated tank bottom sludge, which can contain 10-70% oil, 30-90% water and 5-20% solids, poses significant challenges due to its composition. If not treated on-site, this sludge must be either incinerated or transported to specialized treatment plants, both of which are costly and environmentally hazardous.
GEA offers an advanced portfolio of separation technologies designed to effectively treat tank bottoms. Separator and decanter centrifuges provide an efficient solution for processing tank bottom sludge. These technologies are engineered to handle the complex composition of slop oils, which can have oil viscosities reaching up to 600 cSt at 50°C and specific gravity ranging from 0.8 to 0.96 g/ml. Additionally, GEA equipment is built to withstand the challenges posed by low pH values, high chloride concentrations, abrasive particles, organic solids and the presence of asphaltenes.
GEA has developed a method to recycle oils from tank bottom sludge in an environmentally friendly manner, offering significant advantages to customers. The combined mechanical separation technology, used in several stages along with heating and chemical enhancements, enables the recovery of 80-95% of salable hydrocarbons. This not only adds value by recovering hydrocarbons that would otherwise be lost but also significantly reduces the total disposal costs. By integrating GEA separator and decanter centrifuges into the treatment process, oil companies can efficiently process tank bottom sludge, turning a challenging waste product into a valuable resource while minimizing environmental impact.
Zeigt 2 von 2 an
Sobald der Feststoffgehalt in der zu verarbeitenden Suspension besonders hoch ist, schlägt die Stunde der Dekanter. Sie sorgen für hohe Klärleistung und höchstmögliche Entwässerung oder trennen zwei Flüssigkeiten bei gleichzeitiger Abscheidung der Feststoffe. Wesentliche Voraussetzungen hierfür sind u.a. eine hohe Trommeldrehzahl, ein leistungsst...
GEA Separatoren werden zur Klärung von Flüssigkeiten und Trennung von Flüssigkeitsgemischen eingesetzt. Unter Ausnutzung der Zentrifugalkraft trennen sie Suspensionen, die aus zwei oder mehr Phasen mit unterschiedlicher Dichte bestehen. Sie können für eine flüssig-flüssig, flüssig-flüssig-fest bzw. für eine flüssig-feste Abscheidung genutzt werde...
For feedstock material that can be efficiently processed through dewatering and simultaneous oil and water separation, GEA's 3-phase single-stage decanter centrifuges are the preferred solution. These centrifuges can handle high solid content achieving maximum dewatering and clarification in one stage, making them ideal for easier slop oil treatment requirements.
Single-stage treatment with 3-phase decanter centrifuge
In cases where the feedstock is more challenging to treat or higher oil quality is required, GEA's double-stage treatment process becomes more viable. This involves using 2-phase decanter centrifuges followed by high-speed disk stack centrifuges. The disk stack machines process the decanter centrate phase, separating ultra-fine particles and maximizing water removal. This results in a high-quality oil product that can be merchandized similarly to crude oil.
Double-stage treatment with 2-phase decanter centrifuges and disk stack centrifuges
Die Vermeidung von Verschwendung ist uns bei GEA wichtig, und durch die Nutzung der Leistungsfähigkeit der Gefriertrocknungstechnologie können wir überschüssige Nahrungsmittel in wertvolle, haltbare Produkte umwandeln – und so dazu beitragen, Abfallmengen zu reduzieren, die Lagerfähigkeit zu verlängern und eine nachhaltigere Lebensmittelversorgung für künftige Generationen zu schaffen.
Der südkoreanische Lebensmittelhersteller Pulmuone stellte die F&E-Experten von GEA vor die Herausforderung, eine industriell gefertigte Variante der traditionellen Naengmyeon-Nudeln (kalte, bissfeste Teigware) zu entwickeln. Ihr Beitrag war maßgeblich an der Entstehung des heutigen Verkaufsschlagers beteiligt, der nun mit weniger Wasser und Energie produziert wird als durch herkömmliche Methoden. Das Ergebnis bleibt den traditionellen Ursprüngen des Gerichts ebenso treu wie den Wurzeln des Produzenten Pulmuone in den Aspekten Gesundheit, Wohlbefinden und Nachhaltigkeit.
Im weltweiten Ringen um Wassersicherheit leisten GEA-Technologien zum Einsparen und Aufbereiten von Wasser einen wichtigen Beitrag. Sie helfen, den Verbrauch zu senken, Verschwendung zu vermeiden und Verschmutzung zu reduzieren – in Fabriken, Landwirtschaftsbetrieben und Städten auf der ganzen Welt.