Combined cooling and heating with NH₃
GEA has launched an innovation that combines highly efficient cooling and heating in a single product. The new GEA Blu-Red Fusion is a combination of the successful GEA Blu chillers (low stage) and GEA Red heat pumps (high stage).
At best-in-class efficiency, the GEA Blu-Red Fusion is particularly suited for combined cooling and heating applications with high temperature lifts between heat source and heat sink, where single stage compression would otherwise be inefficient or impossible. Whether in the food, dairy or beverage industry, the GEA Blu-Red Fusion is ideal for cooling and heating applications such as hot water washdown for abattoirs or pasteurization processes. The Fusion is also the first choice for heating only applications, such as district and facility heating, using low-temperature heat sources including water from the environment or sewage and wastewater.
GEA Blu-Red Fusion models are based on the existing Blu chiller (BluAstrum or BluGenium) and Red heat pump (RedAstrum or RedGenium) family and offer the same features and benefits. The Blu-Red Fusion can be easily configured as one product in the product selection and configuration tool GEA RT Select which perfectly matches Blu chiller and Red heat pump modules with respect to the project specific requirements.
The intermediate stage is equipped with a single, high-efficient ammonia - ammonia ’cascade’ heat exchanger. This connection of the low and high stage, with two separated refrigeration circuits, allows the free combination of different models and minimizes the total refrigerant charge. The absence of an intermediate liquid circuit reduces the equipment effort and capital investment, reduces the differential pressure of both stages, and does not waste power on glycol or water pumps. The efficiency benefit easily reaches double digit numbers. This means a dramatic reduction of energy costs and CO2 emissions.
The GEA Blu-Red Fusion offers the highest flexibility for individual operating requirements and seasonal demands. As well as simultaneous cooling and heating in full- or part-load (‘mode 1’), it is possible to switch off the heat pump stage and operate the chiller stage only, when there is no heating demand (‘mode 2’). Finally, the heating capacity can be regulated (reduced) irrespective of the cooling capacity demand (‘mode 3’). It’s also possible to save costs by configuring the Fusion for constantly lower heating demands to prevent unnecessary oversizing of the heat pump module.
*) Sec. refrigerant +12°C / +53.6°F and +6°C / +42.8°F, heat carrier +40°C / +104°F and +70°C / +158°F
Learn more with GEA RT Select – our product selection and configuration tool.
Type 1) | Heat
carrier |
Heating
capacity (kW) |
Cooling
capacity (kW) |
COP combined 2) |
inlet/outlet | R717 |
R717, +12°C and +6°C / |
line | |
BG300-RG500 | +40°C and +70°C / +104°F and +158°F |
425
|
325 | 6.70 |
BG450-RG500
|
+40°C and +70°C / +104°F and +158°F |
625 | 480 | 6.82 |
BG600-RG800 | +40°C and +70°C / +104°F and +158°F |
875 | 675 | 6.84 |
BG900-RG800
|
+40°C and +70°C / +104°F and +158°F |
1100 | 840 | 6.78 |
BG1200-RG1100
|
+40°C and +70°C / +104°F and +158°F |
1670 | 1275 | 6.80 |
BA1500-RAMH
|
+40°C and +70°C / +104°F and +158°F |
1950 | 1400 | 5.55 |
BA1800-RAML
|
+40°C and +70°C / +104°F and +158°F |
2250 | 1610 | 5.52 |
BA1800-RARM
|
+40°C and +70°C / +104°F and +158°F |
2350 | 1680 | 5.50 |
BA1800-RARN
|
+40°C and +70°C / +104°Fand +158°F |
2425 | 1730 | 5.47 |
BG450-RAEC
|
+70°C and +80°C / +158°F and +176°F |
625 | 410 | 4.40 |
BG600-RAED
|
+70°C and +80°C / +158°F and +176°F |
840 | 560 | 4.55 |
BG900-RAHE
|
+70°C and +80°C / +158°F and +176°F |
1150 | 770 | 4.59 |
BG1200-RAHG
|
+70°C and +80°C / +158°F and +176°F |
1500 | 1015 | 4.74 |
BG1200-RAMH
|
+70°C and +80°C / +158°F and +176°F |
1755 | 1185 | 4.72 |
BA1500-RAML
|
+70°C and +80°C / +158°F and +176°F |
2050 | 1365
|
4.57 |
BA1800-RARM
|
+70°C and +80°C / +158°F and +176°F |
2360 | 1570 | 4.56 |
BA1800-RARN
|
+70°C and +80°C / +158°F and +176°F |
2425 | 1605 | 4.53 |
Customized heat pumps are designed for optimized efficiency and a wide range of temperatures and capacities. They serve all common industrial applications and district heating. They are applied when special conditions or requirements outstrip the limits of our standard heat pumps.
With an ESEER >9, these models fully exploit the potential of the GEA Blu chiller concept.
GEA RedAstrum is the standard ammonia screw compressor heat pump that meets the increasing demand for efficient heating. The series is known for its wide capacity and temperature range. It features high-end components and a sophisticated, compact design.
A proven performer becomes even better:
Higher temperatures, an enhanced capacity range, best-in-class efficiencies, increased sustainability at lower total costs – the new GEA RedGenium heat pump has it all.
PR-OLEO® ammonia oils are the natural choice to optimize industrial cooling and heating applications operating with reciprocating or screw compressors.
The GEA Ammonia Dryer removes water from the refrigerant cycle and makes the perfect addition to ammonia refrigeration systems along with filters and purgers.
The GEA Purger removes non-condensable gases from your refrigeration system, maximizing system efficiency.
The intuitive touch for screw and piston compressor control. powerful, yet approachable. Cerebral, yet intuitive. Sophisticated, yet simple. Simply – GEA Omni.
Welcome to the world of simplicity with GEA Service Kits for reciprocating compressors. Our mission is clear - to make your experience with original spare parts seamless and your operations smoother than ever. "Take it easy, use a kit" is not just a tagline – it is a promise we deliver on.
Update your existing screw compressor packages
GEA digital optimization secures significant performance improvement in spray dryer plant at Michigan Milk Producers Association
GEA helps customers test and scale alternative egg products and ingredients made with precision fermentation.
When it comes to improving the health of the planet, GEA takes a leading role. As one of our sustainability-focused strategic objectives, we are forging a path to help our customers across myriad industries to reduce energy use...