Special valves & tank safety systems
VARINLINE® Sampling valves
These valves are used for taking random samples for monitoring the biological condition of product lines. Suitable products: media without suspended particles and of low viscosity, e.g. water, beer, milk, juices without fruit pulp.
Sampling Valve, type TSVN
The valve disk closes the product pipe from the outside (type N) or from the inside (type U).
Sample drawing may be automatically or manually via a one-port or two-port process connection. Optionally, the valve stem sealing may be reinforced by a metal bellows. Position feedback is available on request.
Standard Design
- Materials
Housing 1.4404/AISI 316L
Product contact parts 1.4404/AISI 316L
Other parts 1.4301/AISI 304
Seals EPDM,FKM, HNBR - Surface finish outside matt,
inside Ra<0.8 µm - Standard actuator for
control air pressure min. 6 bar
product pressure max. 10 bar
with stainless steel bellows max. 5 bar
Sizes
DN 40 up to 125
1.5" up to 4" OD
ISO 33.37 up to ISO114.3
2" up to 6" IPS
Downloads
GEA Insights
Pre2Fuel: Cleared for takeoff
GEA's innovative process marks a milestone in the pretreatment of biofuels such as hydro-treated vegetable oil and sustainable aviation fuel. By eliminating the bleaching process, manufacturers benefit from significant savings potential: over 50% lower operating costs and up to 12% less CO2 emissions.
The next era of food production with GEA NEXUS
Climate change and a growing world population put increased pressure on the energy-intensive food industry to feed more people without further impacting the planet. George Shepherd, GEA’s Global Technical Sustainability Manager, explains how GEA uses its engineering know-how to help processors produce more sustainably yet increase productivity.
