Scrubbers
Next generation scrubber for non-ferrous metallurgy. Compact, efficient and cost saving.
Linear Flow Scrubbers are adjustable and high-efficiency scrubbers that represent a substantial advancement on the already mature technology of the Radial Flow Scrubbers.
Used for dust and particulate removal in saturated waste gases, Linear Flow Scrubbers offer increased energy savings and efficiency thanks to their high adaptability, adjustability capacity to steadily scrub at fluctuating gas flow rates.
Best applied in copper smelting furnaces or converters, zinc smelters and roasters, lead smelters, molybdenum roasters, nickel-copper / platinum smelters and other pyrometallurgical processes.
However, Linear Flow Scrubbers are not to be exclusively used for the non-ferrous metallurgical industry.
The raw gas enters from the top. The scrubbing liquid is injected though peripherally arranged nozzles upstream the scrubbing zone. The gas and the scrubbing liquid enter from above and pass through the scrubbing zone. The scrubbing zone is characterized by an extended reaction line or gap that is formed by a movable displacer, with tapers towards the top, and a diffuser attached to the casing.
The relative velocity between the gas and the scrubbing liquid, which is decisive for scrubbing efficiency, occurs along the reaction line. By lifting or lowering the displacer the cross-section of the scrubbing zone can be varied, which allows, even with changing gas volumes, to maintain the gas velocity constant in the reaction line and to keep a constant pressure drop across the scrubbing zone. In this way, defined collecting efficiency can be ensured. The differential pressure is the control parameter.
In cases where gases are hot and not saturated, linear flow scrubbers can be combined with an upstream quench stage for raw gas saturation and pre-dedusting.
Con el objetivo de proporcionar una unidad flexible, capaz de dominar los numerosos problemas de los gases de emisión industriales, en 1950 se desarrolló un lavador ajustable que hoy representa uno de los equipos de alta eficiencia más destacados. En cuanto al tamaño de grano de las partículas de polvo en sólidos y líquidos y a la concentración d...
Tubo en posición vertical con un nozzel de venturi y desplazador (cono venturi), además de boquillas atomizadoras dispuestas concéntricamente sobre el tubo, por encima del venturi.
Tubo en posición vertical o inclinada con entrada de gas vertical y boquillas helicoidales dispuestas concéntricamente en el tubo por encima de la entrada de gas lateral.
Adjustable flow scrubbers with high collecting efficiencies achievement even when working with critical substances. Mainly used for either gas cooling (to reduce the temperature by water evaporation) or gas cleaning (to condense aerosols and remove solid impurities).
La reducción de residuos es importante para nosotros en GEA, y aprovechando el poder de la tecnología de liofilización, podemos transformar los excedentes de alimentos en productos valiosos y duraderos, ayudando a reducir sus residuos, prolongar la duración de almacenamiento y crear un suministro de alimentos más resistente para las generaciones venideras.
Cuando el productor surcoreano de alimentos de origen vegetal Pulmuone planteó a GEA el reto de desarrollar un giro moderno del tradicional fideo frío masticable (naengmyeon), los expertos en I+D de GEA estuvieron a la altura. Ayudaron a crear lo que ahora es un éxito comercial producido con menos agua y electricidad que los métodos antes existentes. El resultado también es fiel a los orígenes tradicionales del plato, así como a las raíces de salud, bienestar y sostenibilidad de Pulmuone.