3-Phase Separating Decanter
The 3-Phase Separating Decanter is a centrifuge in which two liquids of different densities are separated from each other. At the same time solids are separated and discharged.
The feedstock enters the decanter through feed tube and flows into the centrifugation space through the distributor. The conveyor screw transports the solids to the solids discharge. The level of the liquid can be adjusted by fitting regulating rings or disks of the required inner diameter. Separation of the two liquid phases takes place in the separation zone, whereby the light phase flows towards the bowl axis, and the heavy phase towards the bowl wall.
Regarding the discharge of the liquid phases 3-Phase Separating Decanters are available in numerous designs. Liquid phases can be discharged by gravity or under pressure by centripetal pump.
In the case of a 3-Phase Separating Decanter with centripetal pump for the light phase and gravity discharge of the heavy phase, the light liquid phase leaves the centrifugation space over an exchangeable regulating ring and is discharged under pressure by the centripetal pump. At the same time, the heavy liquid phase is discharged under gravity through exchangeable regulating tubes.
Another technical variant is the case of a 3-Phase Separating Decanter with centripetal pump for the heavy phase and gravity discharge of the light phase. The choice of the appropriate design depends on the product to be separated and the lay-out of the customer installation.
Products
Showing 4 of 7
3-Phase Separating Decanter for Industrial Fluids
For the treatment of waste oil, MARPOL liquids, waste emulsions and oily waste water
3-Phase Separating Decanter meatMaster CF for Animal By-Products
For the recovery of animal oils, fats and proteins
3-Phase Separating Decanters for animal and fish by-products
For the recovery of fish oil, proteins and meal
3-Phase Separating Decanters for Oil & Gas
For the Oil & Gas industry GEA offers 3-Phase separating decanters for the treatment of waste and slop oils.
Downloads
Service Products
GEA SAFEXPERT®
The innovative process diagnostic and consultant service.
International Repair Network for GEA Centrifuges
Corrective repairs for your GEA separators and decanters
Remote FATs for GEA Centrifuges
Is a FAT (Factory Acceptance Test) of your centrifuge not possible on site due to current travel restrictions, a very tight schedule or other urgent reasons? Are you generally looking for ways to make business processes more digital and to sustainably reduce costs and time?
Here, too, we are at your side with the professional quality you are accu...
