Add Better
GEA‘s Add Better solutions
Empowering customers with resource-efficient solutions
Aseptic Blower
Compared to its predecessor, the special air recovery system of GEA’s ABF 2.0 uses 31% less energy for bottling. It compresses the air that is needed for blowing process and cap sterilization.
Aseptic Filler
The new water rinsing unit of the GEA EcoSpin2 Zero achieves massive water savings of up to 91% when installed as new machinery and 83% when upgrading the installed base.
Bilge Water Separator
The GEA bilge Separator with integrated direct drive is designed to clean oily water using a high efficiency motor that transfers energy directly to the bowl without belts or clutches, reducing energy consumption by 13%.
Carbon Capture
GEA's integrated Waste Heat Recovery and Carbon Capture solution enables a significant reduction of the overall energy consumption and by that also of CO2 emissions by 11% compared to a stand-alone Carbon Capture solution without Waste Heat Recovery.
Enfriamiento por centrifugado
La unidad de ahorro de agua de centrifugado de GEA reduce el consumo de agua de enfriamiento para separadores en un 100 % en comparación con el enfriamiento convencional.
Clean & Pump
The high-performance GEA Hilge NOVATWIN+ saves an average of 13% energy compared to its predecessor model thanks to its higher efficiency with a smaller pump.
Craft Beer Separator
The GEA plug & win i separator skid features a new integrated direct drive which reduces the energy consumption by up to 10% compared to its previous model.
Drum Forming
MaxiClean drum cleaning machine, a dedicated part of the MaxiFormer drum forming system, saves food manufacturers up to 62% of their water consumption when processing formed products compared to previous versions.
We engineer sustainable solutions to support our customers. Learn more about Add Better.
Environmental Decanter
The GEA environmental Decanter pro provides an energy-efficient solution for both municipal and industrial sludge treatment. Depending on the machine size, it offers energy savings of 15 to 60%.
Heat Pump
Un rendimiento probado se vuelve aún mejor: Temperaturas más altas, una gama de capacidad mejorada, las mejores eficiencias de su clase, una mayor sostenibilidad con costes totales más bajos: la nueva bomba de calor GEA RedGenium lo tiene todo.
Homogenizing Valves
The NanoVALVE improves viscosity and stability in food, dairy, beverage and chemical emulsions, consuming 20% less energy than previous versions.
Homogenizing Valve
The coneVerge® homogenizing valve is suitable for dairy, food and beverage products sensible to homogenization pressure.
Thanks to the innovative design the valve obtains outstanding homogenization performances at Ultra Low Pressure range, allowing energy savings up to 20%.
Separación marina
El separador marino de alta eficiencia de GEA con accionamiento directo integrado transfiere energía directamente al tazón para reducir el consumo de energía en un 9 % en comparación con el modelo anterior.
Membrane Filtration Cleaning
GEA Smart Filtration CIP is a software-based method of operating pumps while cleaning membrane filtration plants in a pulsating way, consuming up to 46% less energy.
Membrane Filtration Flushing
Smart Filtration Flush is a software-based solution designed to reduce water consumption by up to 52% during CIP Flush.
Milk and Whey Separator
The new GEA Advanced Water Supply of the Separator Series MSI enables a process-oriented reduction of cooling and operating water consumption by minimum 48%.
From a single product to entire productions and consulting services. Learn more about Add Better Consulting.
Pretreatment for HVO and SAF
Save up to 50 percent in OPEX and up to 12 percent in CO2 emissions with the new HVO pretreatment process from GEA.
Slow-rotating skimming separators
Dairy separators from the GEA EngySpeed series feature an "oversized" design and operate at a lower bowl Speed - significantly reducing energy requirements by up to 40 % while maintaining the same performance.
Spray Drying
A heat pump solution for spray dryers, AddCool allows milk powder producers to reduce energy consumption by up to 49%.
Spray Dryer Optimization
By applying advanced model-predictive control, GEA OptiPartner improves process stability and capacity utilization in spray drying. This translates to higher productivity and typically 10% lower energy use.
Spiral oven
Horno industrial de espiral GEA CookStar. Una de las familias de GEA con un excelente rendimiento en términos de capacidad, rendimiento, flexibilidad, consistencia y fiabilidad. Cocina perfectamente las aves de corral, el cerdo, la ternera, el pescado o los productos sustitutivos de la carne, superando sistemáticamente a sus rivales.
Prensa de tabletas rotatoria
La GEA NexGen Press® 30 logra una notable reducción del 21 % en el consumo de energía en comparación con las series anteriores de prensas de tabletas.
Tablet press | CDC
The ConsiGma® DC for direct compression is the latest expansion of GEA's continuous portfolio for cost effective, compact, high yield manufacturing systems. It offers a robust and flexible manufacturing method for a wide range of products.
Thermoforming
GEA PowerHeat, la pieza que faltaba en el envasado termoformado: aumenta la productividad hasta un 10%, ahorra hasta un 30% de energía y permite utilizar films monocapa sin comprometer la calidad ni la funcionalidad del envase.
Tunnel Oven
The electric oven retrofit kit GEA E-Switch-Bake enables bakeries to switch from high-consumption gas ovens to more sustainable electric options, saving up to 14% of energy.
Valve Control
GEA’s electronic LEFF® function on top-tier T.VIS® A-15 valve control tops can conjure up to 92% reduction in the amount of water and cleaning agent used during valve seat cleaning.
We engineer sustainable solutions to support our customers. Learn more about Add Better.
Manure enricher
GEA’s ProManure E2950 Manure Enricher enables local production of fertilizer using only livestock slurry, air and electricity and thus reducing harmful emissions by up to 27%.
Milking solutions
GEA’s DairyRobot solution for automated milking requires up to 19% less energy than its predecessor.
Milking solutions
La DairyRotor T8600 es nuestro potente todoterreno tanto para explotaciones en establos como en pastos. Con una ergonomía de trabajo de primera calidad, un reconocido confort para los animales y las avanzadas unidades de control de ordeño DigiTron, garantiza transiciones rápidas de las vacas y operaciones sin problemas.
Milking solution
Alto rendimiento con un diseño exclusivo: Disfrute de una gran experiencia de ordeño, además de confort y durabilidad
