Add Better
GEA‘s Add Better solutions
Empowering customers with resource-efficient solutions
Aseptic Blower
Compared to its predecessor, the special air recovery system of GEA’s ABF 2.0 uses 31% less energy for bottling. It compresses the air that is needed for blowing process and cap sterilization.
Aseptic Filler
The new water rinsing unit of the GEA EcoSpin2 Zero achieves massive water savings of up to 91% when installed as new machinery and 83% when upgrading the installed base.
Carbon Capture
GEA's integrated Waste Heat Recovery and Carbon Capture solution enables a significant reduction of the overall energy consumption and by that also of CO2 emissions by 11% compared to a stand-alone Carbon Capture solution without...
Centrifuge Cooling
The GEA Centrifuge Water Saving Unit reduces the cooling water consumption for separators by 100% compared to conventional cooling.
Hygienic Twin Screw Pump
The high-performance GEA Hilge NOVATWIN+ saves an average of 13% energy compared to its predecessor model thanks to its higher efficiency with a smaller pump.
Craft Beer Separator
The GEA plug & win i separator skid features a new integrated direct drive which reduces the energy consumption by up to 10% compared to its previous model.
Automated Milking
GEA’s DairyRobot solution for automated milking requires up to 19% less energy than its predecessor.
Drum Forming
MaxiClean drum cleaning machine, a dedicated part of the MaxiFormer drum forming system, saves food manufacturers up to 62% of their water consumption when processing formed products compared to previous versions.
We engineer sustainable solutions to support our customers. Learn more about Add Better.
Homogenization Valve
The NanoVALVE improves viscosity and stability in food, dairy, beverage and chemical emulsions, consuming 20% less energy than previous versions.
Manure Enricher
GEA’s ProManure E2950 Manure Enricher enables local production of fertilizer using only livestock slurry, air and electricity and thus reducing harmful emissions by up to 27%.
Marine Separation
GEA’s high-efficiency Marine Separator with integrated direct drive transfers energy directly to the bowl to reduce energy consumption by 9% over the predecessor model.
Membrane Filtration Cleaning
GEA Smart Filtration CIP is a software-based method of operating pumps while cleaning membrane filtration plants in a pulsating way, consuming up to 46% less energy.
Milk and Whey Separator
The new GEA Advanced Water Supply of the Separator Series MSI enables a process-oriented reduction of cooling and operating water consumption by minimum 48%.
Sludge Decanter
GEA sludge Decanters provide an energy-efficient solution for the dewatering of sludge from industrial waste water and water treatment plants.
Spray Drying
A heat pump solution for spray dryers, AddCool allows milk powder producers to reduce energy consumption by up to 49%.
Spray Dryer Optimization
By applying advanced model-predictive control, GEA OptiPartner improves process stability and capacity utilization in spray drying. This translates to higher productivity and typically 10% lower energy use.
From a single product to entire productions and consulting services. Learn more about Add Better Consulting.
Rotary Tablet Press
The GEA NexGen Press® 30 achieves a remarkable 21% reduction in power consumption compared to previous ranges of tablet presses.
Tunnel Oven
The electric oven retrofit kit GEA E-Switch-Bake enables bakeries to switch from high-consumption gas ovens to more sustainable electric options, saving up to 14% of energy.
Valve Control
GEA’s electronic LEFF® function on top-tier T.VIS® A-15 valve control tops can conjure up to 92% reduction in the amount of water and cleaning agent used during valve seat cleaning.
