Add Better

GEA‘s Add Better solutions

Empowering customers with resource-efficient solutions

Add Better – Resource-efficient solutions from GEA
Grâce à la technologie ABF, il est possible de mettre en bouteilles sur un seul et même système des boissons aseptiques à faible et à forte teneur en acide de durées de conservation différentes.

Aseptic Blower

Compared to its predecessor, the special air recovery system of GEA’s ABF 2.0 uses 31% less energy for bottling. It compresses the air that is needed for blowing process and cap sterilization.

Bloc de remplissage aseptique ECOSpin2 Zero

Aseptic Filler

The new water rinsing unit of the GEA EcoSpin2 Zero achieves massive water savings of up to 91% when installed as new machinery and 83% when upgrading the installed base.

carbon-capture-solutions-emission-control

Carbon Capture

GEA's integrated Waste Heat Recovery and Carbon Capture solution enables a significant reduction of the overall energy consumption and by that also of CO2 emissions by 11% compared to a stand-alone Carbon Capture solution without Waste Heat Recovery.

GEA Centrifuge Water Saving Unit

Centrifuge Cooling

The GEA Centrifuge Water Saving Unit reduces the cooling water consumption for separators by 100% compared to conventional cooling.

GEA Hilge NOVATWIN  à arbre nu

Clean & Pump

The high-performance GEA Hilge NOVATWIN+ saves an average of 13% energy compared to its predecessor model thanks to its higher efficiency with a smaller pump.

GEA bilge Separator

Bilge Water Separator

The GEA bilge Separator with integrated direct drive is designed to clean oily water using a high efficiency motor that transfers energy directly to the bowl without belts or clutches, reducing energy consumption by 13%.

GEA plug and win i craft beer skid

Craft Beer Separator

The GEA plug & win i separator skid features a new integrated direct drive which reduces the energy consumption by up to 10% compared to its previous model.

Équipement GEA MaxiFormer

Drum Forming

MaxiClean drum cleaning machine, a dedicated part of the MaxiFormer drum forming system, saves food manufacturers up to 62% of their water consumption when processing formed products compared to previous versions.

We engineer sustainable solutions to support our customers. Learn more about Add Better.

Environmental Decanter

The GEA environmental Decanter pro provides an energy-efficient solution for both municipal and industrial sludge treatment. Depending on the machine size, it offers energy savings of 15 to 60%.

GEA RedGenium

Heat Pump

Notre solution éprouvée devient encore plus performante. Températures plus élevées, plage de capacité élargie, rendements records, durabilité accrue assortie de coûts totaux plus bas : la nouvelle pompe à chaleur GEA RedGenium a tous les atouts.

NanoVALVE haute pression

Homogenizing Valves

The NanoVALVE improves viscosity and stability in food, dairy, beverage and chemical emulsions, consuming 20% less energy than previous versions.

Homogenizing Valve

The coneVerge® homogenizing valve is suitable for dairy, food and beverage products sensible to homogenization pressure.
Thanks to the innovative design the valve obtains outstanding homogenization performances at Ultra Low Pressure range, allowing energy savings up to 20%.

Separators for Marine

Marine Separator

The GEA marine Separator with integrated direct drive efficiently purifies fuel and lube oil using a high-efficiency motor that transfers energy directly to the bowl without belts or clutches, reducing energy consumption by 9%.

GEA Smart Filtration CIP & GEA Smart Filtration Flush

Membrane Filtration Cleaning

GEA Smart Filtration CIP is a software-based method of operating pumps while cleaning membrane filtration plants in a pulsating way, consuming up to 46% less energy.

GEA Smart Filtration Flush

Membran Filtration

Smart Filtration Flush is a software-based solution designed to reduce water consumption by up to 52% during CIP Flush.

Centrifuge Separator MSI Milk Whey Skimming

Milk and Whey Separator

The new GEA Advanced Water Supply of the Separator Series MSI enables a process-oriented reduction of cooling and operating water consumption by minimum 48%.

From a single product to entire productions and consulting services. Learn more about Add Better Consulting.

Slow-rotating skimming separators

Slow-rotating skimming separators

Dairy separators from the GEA EngySpeed series feature an "oversized" design and operate at a lower bowl Speed - significantly reducing energy requirements by up to 40 % while maintaining the same performance.

GEA Pre2Fuel - The better HVO and SAF pretreatment

Pretreatment for HVO and SAF

Save up to 50 percent in OPEX and up to 12 percent in CO2 emissions with the new HVO pretreatment process from GEA.

Système de pompe à chaleur GEA AddCool pour sécheurs-atomiseurs

Spray Drying

A heat pump solution for spray dryers, AddCool allows milk powder producers to reduce energy consumption by up to 49%.

Optimisation des procédés avec GEA OptiPartner

Spray Dryer Optimization

By applying advanced model-predictive control, GEA OptiPartner improves process stability and capacity utilization in spray drying. This translates to higher productivity and typically 10% lower energy use.

GEA CookStar 600

Spiral oven

Four à spirale industriel GEA CookStar. Ce four de la gamme GEA se distingue par d’excellentes performances en termes de capacité, débit, flexibilité, régularité et fiabilité. Il cuit à la perfection la volaille, le porc, le bœuf, le poisson et les produits de remplacement de viande, surpassant avec constance ses concurrents.

NexGen Press 30 with ECM out

Rotary Tablet Press | NexGen Press® 30

The GEA NexGen Press® 30 achieves a remarkable 21% reduction in power consumption compared to previous ranges of tablet presses.

Pharma Technology Compression

Tablet press | CDC

The ConsiGma® DC for direct compression is the latest expansion of GEA's continuous portfolio for cost effective, compact, high yield manufacturing systems. It offers a robust and flexible manufacturing method for a wide range of products.

Système chauffant à zones GEA PowerHeat

Thermoforming

GEA PowerHeat, the missing piece in Thermoforming Packaging: boosts productivity by up to 10%, saves energy by up to 30% and allows the use of monolayer films without compromising on package quality and functionality.

GEA E-Switch Bake

Tunnel Oven

The electric oven retrofit kit GEA E-Switch-Bake enables bakeries to switch from high-consumption gas ovens to more sustainable electric options, saving up to 14% of energy.

LEFF® function integrated in GEA T.VIS A-15 control top

Valve Control

GEA’s electronic LEFF® function on top-tier T.VIS® A-15 valve control tops can conjure up to 92% reduction in the amount of water and cleaning agent used during valve seat cleaning.

We engineer sustainable solutions to support our customers. Learn more about Add Better.

DairyFeed F4500 – Robot d’alimentation GEA

Feeding system

Mettez en œuvre avec précision vos stratégies d’alimentation

ProManure E2950 Enrichisseur de lisier

Manure enricher

GEA’s ProManure E2950 Manure Enricher enables local production of fertilizer using only livestock slurry, air and electricity and thus reducing harmful emissions by up to 27%.

GEA DairyRobot R9500

Milking solutions

GEA’s DairyRobot solution for automated milking requires up to 19% less energy than its predecessor.

DairyRotor T8600, CMS, Rotor

Milking solutions

Le DairyRotor T8600 est notre solution à 360 ° puissante pour à la fois les exploitations pratiquant le pâturage et celles qui privilégient la conduite en stabulation. Ergonomie premium pour les trayeurs, confort animal reconnu et unités de contrôle laitier DigiTron : il assure une circulation rapide des vaches et des opérations fluides.

Le système de traite rotatif de la ligne de produits DairyRotor de GEA

Milking solution

Hautes performances et conception unique : des performances de traite, un confort et une durabilité d’exception

Recevez l’actualité de GEA

Restez au courant des innovations et des activités de GEA en vous inscrivant aux actualités de GEA.

Contactez-nous

Nous sommes là pour vous aider ! Nous avons besoin de quelques renseignements pour pouvoir répondre à votre demande