Add Better
GEA‘s Add Better solutions
Empowering customers with resource-efficient solutions
Aseptic Blower
Compared to its predecessor, the special air recovery system of GEA’s ABF 2.0 uses 31% less energy for bottling. It compresses the air that is needed for blowing process and cap sterilization.
Aseptic Filler
The new water rinsing unit of the GEA EcoSpin2 Zero achieves massive water savings of up to 91% when installed as new machinery and 83% when upgrading the installed base.
Bilge Water Separator
The GEA bilge Separator with integrated direct drive is designed to clean oily water using a high efficiency motor that transfers energy directly to the bowl without belts or clutches, reducing energy consumption by 13%.
Carbon Capture
GEA's integrated Waste Heat Recovery and Carbon Capture solution enables a significant reduction of the overall energy consumption and by that also of CO2 emissions by 11% compared to a stand-alone Carbon Capture solution without Waste Heat Recovery.
Centrifuge Cooling
The GEA Centrifuge Water Saving Unit reduces the cooling water consumption for separators by 100% compared to conventional cooling.
Clean & Pump
The high-performance GEA Hilge NOVATWIN+ saves an average of 13% energy compared to its predecessor model thanks to its higher efficiency with a smaller pump.
Craft Beer Separator
The GEA plug & win i separator skid features a new integrated direct drive which reduces the energy consumption by up to 10% compared to its previous model.
Drum Forming
MaxiClean drum cleaning machine, a dedicated part of the MaxiFormer drum forming system, saves food manufacturers up to 62% of their water consumption when processing formed products compared to previous versions.
We engineer sustainable solutions to support our customers. Learn more about Add Better.
Environmental Decanter
The GEA environmental Decanter pro provides an energy-efficient solution for both municipal and industrial sludge treatment. Depending on the machine size, it offers energy savings of 15 to 60%.
Heat Pump
Ulteriore miglioramento di elevate prestazioni già ampiamente comprovate: temperature più elevate, una gamma di capacità migliorata, la massima efficienza della categoria, una maggiore sostenibilità a costi totali inferiori – ecco la nuova pompa di calore GEA RedGenium.
Homogenizing Valves
The NanoVALVE improves viscosity and stability in food, dairy, beverage and chemical emulsions, consuming 20% less energy than previous versions.
Homogenizing Valve
The coneVerge® homogenizing valve is suitable for dairy, food and beverage products sensible to homogenization pressure.
Thanks to the innovative design the valve obtains outstanding homogenization performances at Ultra Low Pressure range, allowing energy savings up to 20%.
Marine Separator
The GEA marine Separator with integrated direct drive efficiently purifies fuel and lube oil using a high-efficiency motor that transfers energy directly to the bowl without belts or clutches, reducing energy consumption by 9%.
Membrane Filtration Cleaning
GEA Smart Filtration CIP is a software-based method of operating pumps while cleaning membrane filtration plants in a pulsating way, consuming up to 46% less energy.
Membrane Filtration Flushing
Smart Filtration Flush is a software-based solution designed to reduce water consumption by up to 52% during CIP Flush.
Milk and Whey Separator
The new GEA Advanced Water Supply of the Separator Series MSI enables a process-oriented reduction of cooling and operating water consumption by minimum 48%.
From a single product to entire productions and consulting services. Learn more about Add Better Consulting.
Pretreatment for HVO and SAF
Save up to 50 percent in OPEX and up to 12 percent in CO2 emissions with the new HVO pretreatment process from GEA.
Slow-rotating skimming separators
Dairy separators from the GEA EngySpeed series feature an "oversized" design and operate at a lower bowl Speed - significantly reducing energy requirements by up to 40 % while maintaining the same performance.
Spray Drying
A heat pump solution for spray dryers, AddCool allows milk powder producers to reduce energy consumption by up to 49%.
Spray Dryer Optimization
By applying advanced model-predictive control, GEA OptiPartner improves process stability and capacity utilization in spray drying. This translates to higher productivity and typically 10% lower energy use.
Spiral oven
Il forno a spirale industriale GEA CookStar. Uno dei prodotti della famiglia GEA con prestazioni eccellenti in termini di capacità, produttività, flessibilità, uniformità dei risultati e affidabilità. Cuoce perfettamente pollame, maiale, manzo, pesce o prodotti sostitutivi della carne, superando i suoi rivali su ogni fronte.
Rotary Tablet Press | NexGen Press® 30
The GEA NexGen Press® 30 achieves a remarkable 21% reduction in power consumption compared to previous ranges of tablet presses.
Tablet press | CDC
The ConsiGma® DC for direct compression is the latest expansion of GEA's continuous portfolio for cost effective, compact, high yield manufacturing systems. It offers a robust and flexible manufacturing method for a wide range of products.
Thermoforming
GEA PowerHeat, il tassello mancante nella termoformatura: aumenta la produttività fino al 10%, risparmia energia fino al 30% e consente l'uso di film monostrato senza compromettere la qualità e la funzionalità della confezione.
Tunnel Oven
The electric oven retrofit kit GEA E-Switch-Bake enables bakeries to switch from high-consumption gas ovens to more sustainable electric options, saving up to 14% of energy.
Valve Control
GEA’s electronic LEFF® function on top-tier T.VIS® A-15 valve control tops can conjure up to 92% reduction in the amount of water and cleaning agent used during valve seat cleaning.
We engineer sustainable solutions to support our customers. Learn more about Add Better.
Manure enricher
GEA’s ProManure E2950 Manure Enricher enables local production of fertilizer using only livestock slurry, air and electricity and thus reducing harmful emissions by up to 27%.
Milking solutions
GEA’s DairyRobot solution for automated milking requires up to 19% less energy than its predecessor.
Milking solutions
DairyRotor T8600 è la nostra soluzione potente e versatile per l'allevamento in stalla e al pascolo. Grazie all'eccellente ergonomia di lavoro, al comprovato comfort degli animali e alle avanzate unità di controllo della mungitura DigiTron, garantisce un rapido spostamento delle vacche e operazioni senza interruzioni.
Milking solution
Elevate prestazioni in un design unico: Elevata produttività, comfort e durata nel tempo
